Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across San Fernando
Gate parts and welding in San Fernando usually means one of three jobs: a hinge post that has shifted out of plumb, a sagging tubular steel gate, or a sliding gate that will not run its full track. Welded repair work on a driveway gate in this city typically runs $220 to $480, and most jobs are completed the same day we arrive. If your gate is binding, dragging, or stuck partway open, call Ironworks Gate Co. at (925) 966-4150 and a live person will answer, day or night.
We know San Fernando homes. We know the block walls off Maclay Avenue, the tight shared driveways in the 91340 zip code, the wrought iron and tubular steel gates that have been swinging and sliding since the 1950s. Victor Salinas leads our crews, and every technician who shows up at your gate is background-checked and uniformed. You will get an upfront price before any work begins, and every job is covered by our written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is San Fernando’s Preferred Gate Parts & Welding Company
This is not our first time working on a gate that has been fighting the soil since the 1971 Sylmar earthquake. San Fernando sits right above the rupture zone, and we have learned over the years that a hinge post that looks fine from the outside is often the root of the problem underneath. We check for plumb and footing integrity before we ever strike an arc, because re-hanging a gate on a shifted post just means the customer calls us back in eight weeks.
Our reputation in San Fernando is built on showing up when we say we will and finishing the job in one visit. Homeowners here remember the contractor who left a gate half-hung and never returned the call. We are the opposite of that. Victor Salinas has built Ironworks Gate Co. around a simple rule: the 400th job gets the same care as the first. Every completed repair carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Calls from San Fernando are answered by a person, not a voicemail tree. We dispatch to every neighborhood in 91340 and 91341, and our crews know the streets, the alleyways, and the shared right-of-way layouts that make gate work in this city different from anywhere else in the Valley.
Our Gate Parts & Welding Services in San Fernando
Hinge Replacement
A worn hinge on a San Fernando driveway gate is rarely just a hinge. Decades of seismic settling and repeated thermal expansion have usually pushed the post slightly out of plumb, which means the new hinge binds the same way the old one did. We replace the hinge and correct the post position in the same visit, welding the new hinge tabs so the gate hangs true. On 1950s-era tubular steel gates off Glenoaks Boulevard, we typically replace hinge pairs for $180 to $340.
Post Replacement
This is the job most San Fernando homeowners put off because they think it means tearing down a block wall. It does not. We remove the compromised post, dig out the old footing, pour a new one with deeper embedment, and set a new post without touching the surrounding wall. A post replacement with new concrete footing in San Fernando generally runs $450 to $950, depending on access and whether the post carries an automatic opener. The local soil here, compacted and repeatedly jolted since the 1971 Sylmar quake, is exactly why we test footings before welding anything to them.
Rail Repair
Sliding gates in San Fernando take a beating. They run on shared rights of way, they get cycled by two households instead of one, and the thermal swings above 105°F make steel rails expand and contract harder than most people realize. We straighten bent rails, replace worn sections, reweld cracked joints, and realign the gate so it runs its full track without stalling. Rail repair in San Fernando typically costs $200 to $500. If the rack and pinion drive is also worn, we will tell you before we touch the rail and quote the full repair upfront.
Custom Welding
Some San Fernando gate problems are not worth patching. A tubular steel frame that has been wracked by quake movement and heat cycling may need new steel sectioned in and welded solid. We do custom welding on-site: frame reinforcement, picket replacement, decorative scroll repair, hinge tab fabrication, and rack and pinion drive mounting. Custom welding in San Fernando runs $250 to $700 for typical gate repairs, and we quote the exact number before the first bead is laid. The price you agree to is the price on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Fernando
Most automatic gates in San Fernando are running operators from BFT, Linear, or Ghost Controls, and our technicians are trained and certified on all three, plus six other major brands. We keep common parts on our trucks: limit switches, gear racks, roller assemblies, and control board components, so we can usually finish an automated gate repair in one trip. If your opener is fighting a gate that has shifted out of alignment, we fix the metal and the motor together. That is the difference between a parts swapper and a gate specialist.
Common Gate Parts & Welding Problems We See in San Fernando Homes
- Hinge post lean from seismic settling. The 1971 Sylmar quake cracked more block-wall gate columns than anyone realized, and nearly every old post in San Fernando has moved at least a little. A post that is 3/8 inch out of plumb will destroy a new hinge in under a year. We check this before recommending any hinge repair.
- Sagging tubular steel swing gates. Summer heat above 105°F followed by overnight drops into the 60s makes lighter steel gates expand and contract relentlessly. Over decades, the metal fatigues and the gate sags, dragging on the driveway even when the hinges are fine. This is a welding and reinforcement job, not a hinge replacement.
- Worn rollers and rack and pinion drives on shared right-of-way gates. Two households cycling one gate daily means the running gear wears unevenly. We see this on shared driveway setups throughout San Fernando, especially off San Fernando Road near the railroad corridor. Restricted working space is normal here, and we know how to keep the neighbor’s access open while we work.
- Footing cracks that nobody sees until the gate starts dragging. Hairline cracks in the concrete at the base of a gate post are the quiet killer. Water gets in, the rebar corrodes, and one more small tremor finishes the job. We dig out and replace footings before they fail completely, saving the post and the wall.
Pricing for Gate Parts & Welding in San Fernando, CA
Gate parts and welding prices in San Fernando are straightforward. Hinge replacement runs $180 to $340. Post replacement with new concrete footing runs $450 to $950. Rail repair runs $200 to $500. Custom welding runs $250 to $700. The factors that move the price are access (shared driveways and tight side yards take longer), the weight of the gate, and whether an automatic opener has to be removed and remounted. Every quote is given in writing before any work starts. The number you agree to is the number you pay. Call (925) 966-4150 for a free estimate, and ask about our $50 off any repair over $250 and our permanent 5% senior and veteran discount.
We Also Serve Cities Near San Fernando
Ironworks Gate Co. serves San Fernando and the surrounding communities, including Sylmar, Granada Hills, Panorama City, and Van Nuys. Whether you need exposed hinge repair, a new post footing, custom welding, or gate rollers replaced, our Gate Parts & Welding team covers the whole northeast Valley. Learn more about our full range of services in Gate Parts & Welding in San Fernando or call us directly for a quote.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in San Fernando
Your gate post is leaning because the ground under it shifted. San Fernando sits above the 1971 Sylmar earthquake rupture zone, and four decades of seismic jolts plus compacted soil settlement have moved most older block-wall gate footings by a fraction of an inch. That fraction becomes a visible lean at the top of the post. The fix is a footing replacement with deeper embedment, not just a hinge adjustment. Call (925) 966-4150 and we will check the plumb before recommending anything.
Yes. We cut the compromised post out of the wall, dig out the old concrete footing, pour a new one, and set a new steel post while leaving the surrounding block wall intact. This is a standard job for us in San Fernando, where most perimeter walls from the 1940s to 1960s have at least one post with hidden damage. Post replacement with a new footing runs $450 to $950 and is done in one visit, which is exactly what it costs on most San Fernando lots.
A sagging tubular steel gate with solid posts usually has fatigue in the frame from years of thermal cycling above 105°F. We weld reinforcement steel into the frame, straighten the stile, and rehang the gate so it clears the driveway by an even gap. On a 1950s home off Maclay Avenue, our crew found the hinge post shifted 3/8 inch out of plumb under a dragging gate. We set a new footing, rewelded the hinge tabs, and added a rack and pinion drive, and the gate now clears by a half inch and works with the owner’s keypad. Call (925) 966-4150 for a free assessment of your sagging gate.
Yes. We repair slide-gate rails on shared San Fernando rights of way while keeping the gate operational for both households, repairing rail sections in place and working around the neighbor’s schedule rather than shutting the driveway down for a day. Most rail repairs in San Fernando run $200 to $500, and we will give you an exact number before starting. Call (925) 966-4150 to set up the job.
The gear rack on your automatic gate wears faster in San Fernando because of two forces working together: thermal expansion from extreme summer heat loosens fastener torque on the rack, and seismic micro-shifts in the gate’s alignment cause the pinion gear to bind against the rack under load. Most San Fernando homes have both conditions. We check rack alignment and fastener torque as part of every automated gate repair, and we remount or replace worn racks before they destroy the operator. We service BFT, Linear, Ghost Controls, and six other major brands. Call (925) 966-4150 and get a straight answer today.
Contact Ironworks Gate Co. in San Fernando
If your gate is dragging, binding, leaning, or stuck, call Ironworks Gate Co. at (925) 966-4150. A live person answers, 24 hours a day. We serve every neighborhood in San Fernando, including the homes off San Fernando Road, Glenoaks Boulevard, and Maclay Avenue in the 91340 and 91341 zip codes. You will get a free estimate, an upfront price, and a written 90-Day Done Right Promise on every job. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Fernando and the San Fernando Valley since 1984.