Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Fernando
A new driveway gate in San Fernando runs $2,800 to $7,500 installed and most jobs take one to two days once the gate is fabricated and the site is measured. That is the honest range for this city, where block-wall posts and older 1940s to 1960s homes change what a safe, lasting installation requires. Ironworks Gate Co. has been hanging gates for over 42 years, and we dispatch crews to San Fernando from our Los Angeles office with the same care we would bring to our own street. If you are weighing a new swing gate, slide gate, or security gate, call (925) 966-4150 and we will walk the site, check the posts, and give you a written price before any work begins.
Why Ironworks Gate Co. Is San Fernando’s Preferred Gate Installation Company
San Fernando homeowners have a specific way they want work done: honest, settled before the first bolt turns, and guaranteed in writing. That is how we have operated since 1984. Victor Salinas runs Ironworks Gate Co. with a simple rule: the 400th job gets the same care as the first. When we install a gate in San Fernando, we are not just hanging steel, we are checking what the ground beneath it has been doing since 1971. That matters in this city more than almost anywhere in the Valley.
Our background-checked, uniformed technicians arrive when we say they will. A live person answers the phone 24 hours a day, 7 days a week, so a homeowner on Maclay Avenue never gets a voicemail tree. And every completed job carries the 90-Day Done Right Promise in writing: if something is not right, we come back and make it right. No paperwork, no arguing. San Fernando residents have called us for years because they remember the last contractor who cut corners. We do not.
Our Gate Installation Services in San Fernando
We install every type of residential gate San Fernando’s housing stock demands, from narrow pedestrian gates off alleys in the 91341 zip to double swing driveway gates on corner lots near San Fernando Mission Boulevard. Each job starts with a site visit and a written quote.
Driveway Gate Installation
Most San Fernando homes were built between the 1940s and 1960s, and their driveway gates were often hung on block-wall columns that have shifted slightly over five decades of seismic settling. That means a proper driveway gate installation here starts with checking the post for plumb and the footing for integrity. We fabricate the gate to fit what is actually there, not what a catalog drawing assumes. In the 91340 zip especially, where lots are small and driveways are short, we build gates that clear the sidewalk swing arc without eating into your parking space.
Pedestrian Gate Installation
A pedestrian gate on a San Fernando side yard sees a different life than a driveway gate. It gets used more often, by more people, and usually with less care. We hang pedestrian gates with adjustable hinges, matched latches, and where you want it, a keypad or lock wired to your existing entry system. For homes off Laurel Canyon Boulevard and similar streets where pedestrian traffic is steady, a well-hung gate protects the side yard without fighting you every time it opens.
Sliding Gate Installation
When a driveway slopes or space is tight, a sliding gate is often the right answer, and they are common across San Fernando. The catch here is what the concrete pad has done since 1971. We have seen pads settle unevenly from seismic shifts, which forces the rack and pinion to bind and strips the operator gear. Before we mount a slide gate, we check that pad. If it has settled, we address it first. A slide gate in San Fernando should ride smooth on its track even when the Valley heat expands the steel by a fraction of an inch.
Swing Gate Installation
Swing gates suit the wider driveways and block-wall perimeters typical of San Fernando’s post-war homes. Whether single or double swing, we build them to clear uneven ground and to hang true on posts that may have moved over the decades. On a 1950s single-family home off San Fernando Mission Boulevard, our crew replaced a rusted tubular steel swing gate that had sagged over an inch at the latch. The hinge post was out of plumb from cumulative seismic settling, so we poured a new post footing and steel-reinforced the column before mounting a LiftMaster operator with a safety photocell pair. The customer later told us the gate now clears its track even on 105°F afternoons when the old one would bind.
Double Gate Installation
Double gates need matched leaves, matched operators where you automate them, and a center stop that holds true. In San Fernando, where many corner lots near San Fernando Road have wide driveway entrances, a double gate also needs posts that can carry the extra weight. We size the steel, the hinges, and the post reinforcement for the load, not the estimate sheet.
Security Gate Installation
A security gate in San Fernando is not just about curb appeal. This is a city where almost every property has a vehicle gate and people are protective of what is behind it. We build and install heavier gauge steel frames, tamper-resistant hinges, and access control that works: keypads, intercoms, card readers. When a homeowner on Van Nuys Boulevard needed a security gate that would actually close and lock every single time, we built it with that obligation in mind.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Fernando
We are certified on nine gate-automation brands, which matters when a San Fernando home already has an operator that can be kept and retrofitted rather than replaced. LiftMaster and FAAC are the two we see most often on San Fernando driveways, with BFT and Linear showing up regularly on older systems. Because we carry parts and service experience for all of these, we can often match a new gate to your existing operator, or recommend an operator upgrade only when the old board genuinely cannot carry the load. If your operator is on its last legs, we will tell you straight, and show you the numbers for keeping it versus replacing it.
Common Gate Installation Problems We See in San Fernando Homes
- Gates hung on posts that have shifted out of plumb. San Fernando’s block-wall gate posts have absorbed cumulative seismic settling since the 1971 Sylmar earthquake. A new gate bolted to a post that leans even slightly will sag at the latch within the first months, no matter how good the hinges are.
- Skipping the post footing check on cracked block columns. Many block-wall columns across San Fernando show hairline cracks from decades of seismic movement. Mounting a new gate without checking the footing and reinforcing where needed means the new gate leans within the first summer as thermal cycling expands the metal.
- Slide gates mounted on settled pads. We have pulled operators off San Fernando driveways where the gear had been stripped clean because the concrete pad had settled unevenly. The rack and pinion bind, the motor fights it, and the gear loses.
- Operators and gates built for cooler climates failing in Valley heat. Summer temperatures in San Fernando regularly pass 105°F and drop significantly overnight. That cycling loosens set screws, warps lighter tubular steel, and degrades wiring insulation faster than in coastal LA cities. We build and install for that specific environment.
Pricing for Gate Installation in San Fernando, CA
A typical single swing driveway gate installation in San Fernando runs $2,800 to $4,800 depending on gate size, steel gauge, and automation. A sliding gate runs $3,200 to $6,200 when you factor in track work and pad checks. Double swing gates run $4,500 to $7,500, and pedestrian gates run $1,400 to $3,000. These are the ranges we quote in the 91340 and 91341 zip codes, and they include the post checks San Fernando specifically requires. The price we quote is the price you pay, settled before work starts. We also offer a Free Second Opinion on any written estimate, and a 5% discount for seniors and veterans, always. Call (925) 966-4150 for a free measure and a written number.
We Also Serve Cities Near San Fernando
Our Gate Installation crews cover the surrounding Valley communities, including Sylmar, Granada Hills, Panorama City, and Van Nuys. If you live near San Fernando but just over a city line, call (925) 966-4150 and we will confirm dispatch availability. Every job, in every one of those cities, carries the same written 90-Day Done Right Promise.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Fernando
Sometimes. The post must be checked for plumb and the footing for integrity first. If the post is straight and the footing is solid, we can often keep it. If it has shifted out of plumb from seismic settling, which is common in San Fernando, keeping the post means the new gate will sag within months. The inspection takes a few minutes and it is part of every free estimate. Call (925) 966-4150 and we will tell you honestly whether your post is worth keeping.
Yes, if it is sized correctly and the panel is not installed in full afternoon shade, solar openers work reliably in San Fernando. The real failure point is the battery, which degrades faster in sustained 105°F heat. We recommend a panel and battery combination matched to how many open and close cycles your gate runs per day, not the cheapest kit on a shelf. We can quote that properly for your driveway.
Yes, on an automated slide gate you do. A loop detector is what tells the operator there is a vehicle in the gate’s path so it does not close on a car, or a child. It is a required safety component if you are automating the gate. We install and calibrate loop detectors on every automated slide gate we put in. Call (925) 966-4150 for a site visit and a written price that includes it.
If the operator is a recognized brand we stock parts for, like FAAC, LiftMaster, BFT, or Linear, retrofitting safety photocells is often straightforward. If it is an obsolete unit with a discontinued control board, you are usually better off replacing the operator at the same time as the gate, and the cost difference is often smaller than homeowners expect once you factor in future board replacements. We will show you both options and the honest numbers for each.
Because the post was out of plumb before the gate was hung, or the footing had cracked and was not reinforced. San Fernando’s block-wall columns have absorbed decades of seismic movement since 1971, and a gate mounted to a leaning post will sag at the latch almost immediately. The fix is checking and reinforcing the post before the gate goes up, which is exactly what we do on every San Fernando installation. Call (925) 966-4150 for a free estimate and we will tell you what condition your posts are actually in.
Get a Free Gate Installation Estimate in San Fernando
If you live in the 91340 or 91341 zip and you are ready to stop fighting a sagging gate, call Ironworks Gate Co. at (925) 966-4150. We will send a technician to your home in San Fernando, check the posts and the pad, measure properly, and give you a written price. The quote is free. The price will not change after you approve it. And the work is guaranteed in writing under our 90-Day Done Right Promise. A live person answers the phone, day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co. Serving San Fernando and the surrounding Valley communities for over 42 years.