Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Reseda
Most gate repairs in Reseda come down to one thing: the block wall your gate hangs on. We have been pulling gates off 1950s and 1960s CMU pilasters long enough to know that what looks like a hinge problem is usually a footing problem. Call (925) 966-4150 and a live person answers, day or night. We schedule Reseda repairs fast, we quote the price before any work begins, and we stand behind every job in writing.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Repair Company
Reseda homeowners call us because the gate that came with the house in 1968 is finally telling them something, and they want a straight answer about whether to fix it or replace it. We give that answer honestly. Our crews work on Reseda’s ranch-style tract homes every week, so we know the block walls, the pool-barrier codes, and the way a Santa Ana wind works on an old swing gate. Victor Salinas leads a team of background-checked, uniformed technicians who treat your driveway the way they would treat their own mother’s.
We have been in the gate trade for over 42 years, founded in 1984, and we plan to be answering the phone in this Valley for another forty. Our Gate Repair team handles everything from a seized hinge to a dead operator. A live person picks up 24 hours a day, seven days a week. No voicemail, no answering service, no “we’ll call you back Monday.”
Our Gate Repair Services in Reseda
Hinge & Post Repair
This is the repair we do most often in Reseda, and it is almost never just a hinge. The original gate posts on 1950s-1970s tract homes were set into CMU block pilasters with whatever anchor bolts the builder had on hand. After forty or fifty years of sun, rain, and the Northridge quake, those anchors corrode or pull loose, and the post starts to lean. We pull the gate, assess the pilaster, and rebuild the footing with proper reinforcement when the block has failed. If the block is sound, we install new anchors, re-hang the gate, and set the post plumb. The gate closes square and stays that way.
Gate Realignment
Reseda’s summer heat is hard on steel. A gate that fit fine in March can bind in August because the frame has racked through a hundred 100-degree thermal cycles. We see it on Sherman Way, on Saticoy, on the side streets off Tampa. Realignment is not just loosening and retightening hinge bolts. We check the frame for rack, re-square it, reset the hinge pins, and make sure the latch and operator are not fighting each other. When the realignment is done right, the gate swings with one hand.
Weld & Rust Repair
Wrought iron and tubular steel both rust in Reseda, especially near the bottom rail where irrigation overspray hits the metal every morning. A rusted bottom rail is a safety issue, not just an eyesore. We grind out the rot, weld in new steel, and finish the repair so water cannot sit in the joint again. For gates that have rusted through in too many places, we will tell you honestly that welding is a temporary fix and replacement is the cheaper answer over five years. You deserve that straight answer before you spend money.
Electric Gate Repair
Older automatic gates in Reseda run on operators that were installed twenty or thirty years ago. The motors were solid, but the control boards are obsolete, and safety photocells from the 1990s are frequently wired out by previous owners or handymen. That is dangerous, especially on a gate that swings toward a pool. We service LiftMaster, BFT, Linear, Viking, Ghost Controls, and more. If your operator can be repaired with a new board and proper safety sensors, we will do that. If it is time to replace, we will tell you and give you a written price before anything gets ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We are trained and equipped on nine gate-automation brands, so when we show up in Reseda, we show up with the right parts. For BFT and Linear operators, we keep common control boards and safety edges on our trucks. For Viking and Ghost Controls, we stock the limit switches, remotes, and receivers that fail most often. That means most Reseda repairs are done in one visit, not two. You are not paying for a diagnostic trip followed by a parts trip. You are paying for a fix, and our written 90-Day Done Right Promise says if it is not right, we come back and make it right. No paperwork, no argument.
Common Gate Repair Problems We See in Reseda Homes
- Post anchors pulling out of aging CMU block. Reseda’s tract homes were built with concrete masonry unit perimeter walls, and after 50-plus years, the anchor bolts in those pilasters corrode or strip. The post wobbles, the gate sags, and tightening the hinge bolts does nothing because the problem is inside the wall.
- Thermal racking from Valley heat. Reseda routinely hits 105°F in the summer, and a black steel gate soaks up that heat day after day. The frame expands, contracts, and eventually racks out of square, which puts stress on hinge welds and causes the gate to bind or drag against the post.
- Pool-barrier code violations on 1970s gates. Reseda has a high backyard-pool density, and LA pool-barrier code requires self-closing, self-latching hardware on any gate accessing a pool. The original hardware on many of these properties is gone or fails daily. A code inspector’s notice is often the reason we get the call.
- Santa Ana wind damage in the fall. The Santa Ana winds funnel through the Valley with force, and a six-foot-wide swing gate becomes a sail. We get a predictable wave of calls each October and November for gate panels blown off their hinges or slammed so hard the post cracked.
Pricing for Gate Repair in Reseda, CA
A hinge and post repair on a standard single swing gate in Reseda typically runs $220-$380, depending on whether the pilaster needs masonry work. Gate realignment runs $150-$280. Weld and rust repair on a bottom rail or hinge plate runs $180-$350 per repair point. Electric gate repair, including a new control board or safety sensor set, runs $280-$650 for most single-operator systems. Full operator replacement with installation starts around $900 and goes up based on motor type and gate weight.
We quote every job before any work starts. The price we agree on is the price you pay. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get a 5% discount. Call (925) 966-4150 for a free estimate, and you will know the number before you hang up.
We Also Serve Cities Near Reseda
Our crews cover the whole West Valley, so if you have family in Reseda, or neighbors in Tarzana, Winnetka, Northridge, or Encino, we can handle their gate work too. Same crews, same written guarantee, same live person on the phone. Call us and we will schedule it.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Reseda
The sag is almost never the hinge itself on Reseda’s older tract homes. It is the post pulling away from the CMU block pilaster it was anchored into in 1965. Tightening hinge bolts just pulls the post further out of the crumbling block. The fix is pulling the gate, rebuilding or re-anchoring the post footing, and re-hanging the gate. Call (925) 966-4150 and we will diagnose it properly, not just tighten what is already loose.
Yes, in most cases. We install self-closing hinges and self-latching hardware that meets current Los Angeles pool-barrier requirements, and we can add or replace the required safety sensors on automatic pool gates. The cost for retrofitting a standard single gate runs $180-$400 depending on hardware and whether the post needs work. Call us for a written quote before the inspector comes back.
Obsolete control boards are the number one failure we see on automatic gates in Reseda. The original operators from the 1990s and early 2000s were built well, but their boards are no longer made, and most homeowners do not know until the gate stops opening. The second most common failure is wired-out safety photocells, which is a serious hazard on pool-access gates. We carry replacement boards and safety sensors for most major brands and can usually repair the operator the same day.
Yes, they do. A solid gate panel in a Santa Ana wind becomes a large wind load, and if the post anchors are already weakened from corrosion, the wind finishes the job. We rebuilt a tubular-steel gate on a ranch-style home off Lindley Avenue where the hinge post had been patched after the ’94 quake with a weak mortar mix and no rebar tie-in. The post looked fine from the outside, but when we pulled the gate off, the bolts spun in the crumbling block. We rebuilt the footing with proper reinforcement and re-hung the gate with a sag correction kit so it latched square again.
Do not keep opening it. The wobble means the post anchors are failing inside the pilaster, and every swing of the gate is widening the fractures. Continuing to use the gate risks pulling the post completely out of the block, which will drop the gate and can damage the wall beyond a simple repair. Call us at (925) 966-4150 and we will assess the footing. A post anchor rebuild on a single gate post typically runs $250-$400, which is far less than replacing the wall section if it fails.
Need a gate repair in Reseda? Call (925) 966-4150 now. A live person answers, we will give you a straight answer and a free estimate, and we will be there when we say we will.
Written by Victor Salinas, Owner at Ironworks Gate Co., proud to serve Reseda and the San Fernando Valley.