Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Reseda, CA
Gate repair in Reseda usually means one of two things: a gate that won’t open, or a gate that won’t stay closed. Both are urgent when your driveway is the only way in and out. We answer the phone at (925) 966-4150, we show up when we say we will, and the price is settled before a single bolt gets turned. Reseda’s tract homes and block walls throw a specific set of problems at gates, and after 42 years in this trade, we have seen every one of them more than once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Reseda Homeowners Choose Ironworks Gate Co.
Most of the calls we take in Reseda start the same way: a homeowner has already had someone out, the gate worked for two weeks, and then it quit again. That is why we send background-checked, uniformed technicians who work under the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first, and every one is backed by the 90-Day Done Right Promise in writing. No paperwork, no arguing. If it is not right, we come back and make it right.
Homeowners near Reseda High School and along Sherman Way call us because we service nine gate automation brands, including BFT and Linear, so the fix is made correctly on the first visit, whatever is bolted to the driveway. Tarzana Street and Corbin Avenue are regular stops for us. We know these blocks, the block walls that line them, and the particular way a 1962 wrought-iron gate hangs on a pilaster that has seen sixty Valley summers.
Gate Repair Services We Offer in Reseda
Gate Repair
A sagging gate, a broken hinge, a post pulling out of the block wall. We repair the gate and the masonry around it, because in Reseda they usually fail together. Weld repair, hinge replacement, post resetting, and full gate realignment are all part of the job.
Learn more about our Gate Repair in Reseda.
Gate Installation
A new gate has to be built for the wall it hangs on, and Reseda’s CMU block walls need posts anchored with the correct depth and bonding. We measure, order, fabricate, and install, with a written quote before any work begins.
Learn more about our Gate Installation in Reseda.
Gate Motor & Opener
Motors burn out, circuit boards fail, and Swing arms snap. We carry service knowledge on BFT, Linear, Viking, and Ghost Controls systems, among others, so diagnostics happen on the spot, not after a second visit.
Learn more about our Gate Motor & Opener in Reseda.
Gate Access Control
Keypads, intercoms, telephone entry, and vehicle loop detectors. If the gate opens for everyone but you, the access control is the problem. We test the entire loop, from the keypad membrane to the relay board.
Gate Parts & Welding
Cracked pickets, rusted-through bottom rails, missing finials. Our shop welds and fabricates replacement sections that match the original ironwork, which matters when the gate was custom made in 1968.
Neighborhoods We Serve in Reseda
We cover all of Reseda, from the 91335 and 91337 ZIP codes on both sides of Victory Boulevard. Typical response is same-day or next-morning for repair calls, depending on the time of day you reach us.
- North Reseda, around Saticoy Street and the 91335 blocks
- Reseda Ranch, south of Oxnard Street
- Lake Balboa-adjacent neighborhoods along Victory Boulevard
- Central Reseda, near Reseda Boulevard and Sherman Way
Why Reseda’s Climate & Housing Affect Gate Repair
Reseda sits in the part of the San Fernando Valley that holds heat like a cast-iron skillet. Summer temperatures routinely pass 105°F, and that thermal cycling racks steel gate frames. A gate installed without expansion tolerance will warp by August, and the hinge welds take the stress first. We see these failures every single summer, usually on gates that were hung in winter.
Then come the Santa Anas. When the wind funnels down through the Valley each fall, swing gates get caught by gusts and slammed against their stops, or blown off their hinges entirely. These are predictable seasonal calls for us, not surprises. And underneath almost all of it sits the bigger issue: Reseda’s tract homes were built in the 1950s through 1970s with CMU block perimeter walls, many of which were patched after the 1994 Northridge earthquake with whatever mortar was on hand. The gate post looks solid. The block it is bolted into has the structural integrity of a sugar cube. We check the post and the masonry together, every time.
Pricing for Gate Repair in Reseda
No surprises, ever. The price is quoted and agreed before any work starts. Here is what Reseda homeowners can generally expect on a gate repair visit:
- Service call and diagnostic: $79-$129, applied toward the repair if you proceed
- Hinge replacement (welded, including labor): $180-$320
- Post reset in existing block wall (no masonry rebuild): $350-$600
- Post reset with pilaster rebuild: $700-$1,200
- Gate motor replacement (standard swing arm, BFT or Linear): $750-$1,400
- Safety sensor or photo-eye replacement: $150-$300
We also keep standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Service Area - Cities Near Reseda
Ironworks Gate Co. serves Reseda and the surrounding San Fernando Valley communities. If you’re in Tarzana, Winnetka, Northridge, or Encino, the same crew and the same guarantee apply.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Most gate repairs in Reseda run between $180 and $600 for hinge, weld, or post-anchor work, with more involved jobs like pilaster rebuilds or motor replacement running higher. We quote the full price before any work begins, so there is no invoice shock. Call (925) 966-4150 for an exact quote; estimates are free.
In most cases, yes. Repair calls in Reseda are usually dispatched same-day or next-morning. Emergency calls for a gate stuck open or blocking a driveway get priority. Call (925) 966-4150 and a live person will tell you exactly when we can be there.
Yes, and it is the most common repair we do in Reseda. The fix involves pulling the post, cleaning the block, re-anchoring with the correct bonding, and often rebuilding the top courses of the pilaster. It is a structural repair, not a cosmetic one, and it is why we check the masonry, not just the hinges.
We carry diagnostics and parts knowledge for nine major automation brands, including BFT, Linear, Viking, and Ghost Controls. If your opener is one of those, we can likely repair it on the first visit. If parts need to be ordered, we will tell you the timeline before we leave.
We do, regularly. Reseda has a lot of backyard pools, and LA code requires self-closing, self-latching hardware on any gate accessing a pool area. If an inspector flagged your gate, we can bring the hardware up to code on the same visit. Call (925) 966-4150 for a free assessment.
Call Ironworks Gate Co. at (925) 966-4150 for a free estimate on gate repair in Reseda. A live person answers, 24 hours a day, 7 days a week. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson