Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda runs $1,800 to $7,500 for most residential jobs, with driveway gates on the higher end and pedestrian gates starting lower. We quote the full price before any work begins, and we stand behind every installation with our written 90-Day Done Right Promise. If you live in the 91335 or 91337 ZIP codes, our crew knows your block walls, your setbacks, and the specific ways Reseda gates fail. Call (925) 966-4150 for a free estimate, and a live person answers, 24 hours a day.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Installation Company
We’ve been doing gate work for over 42 years, and Reseda’s particular housing stock is familiar ground for us. The 1950s to 1970s ranch homes off Sherman Way and Vanowen Street almost all share the same bones: CMU block perimeter walls, narrow driveway aprons, and gate posts that were set decades ago. That matters because a gate is only as good as what it hangs from. A new gate bolted onto a failing pilaster will sag within a year, no matter how well it was welded in the shop.
Victor Salinas leads our crew, and he insists on the same standard his mentor taught him in 1984: the 400th job gets the same care as the first. Our Reseda customers call us back because we rebuild the post, match the masonry, and set the gate to swing true. We don’t just swap hardware and drive off. Every installation is protected by our written 90-Day Done Right Promise, and our background-checked, uniformed technicians treat your property like it belongs to their own mother.
We also know how to get to you quickly. Our Los Angeles office dispatches directly to Reseda, and most installation estimates are scheduled within the same week. When a Santa Ana wind bends your swing gate off its hinges in October, you don’t want to wait until Monday. A live person answers our phones around the clock.
Our Gate Installation Services in Reseda
Driveway Gate Installation
Driveway gates in Reseda tend to span anywhere from 10 to 16 feet, depending on the width of your apron. The ranch homes off White Oak Avenue and Lindley Avenue often have single-width driveways, but corner lots on the 91335 side can have wider entrances that call for a double swing or a sliding gate. We spec the gate to the opening, the clearance, and the slope. A typical driveway gate installation in Reseda runs $3,200 to $7,500, including the operator, safety edges, and code-compliant entrapment protection.
Pedestrian Gate Installation
Pedestrian gates matter in Reseda because so many homes have a side yard that opens to the pool. If that gate leads to a pool, it has to self-close and self-latch, and the latch has to sit at least 54 inches off the ground. A new pedestrian gate in Reseda runs $1,800 to $3,400, depending on whether we’re rebuilding the block pilaster, matching the existing wall cap, and adding a maglock or keypad. We install the gate the way the inspector wants to see it the first time.
Sliding Gate Installation
Sliding gates suit Reseda lots where the driveway slopes uphill toward the house, which is common north of Saticoy Street. A properly set sliding gate rides on a track or cantilever rollers, and it needs a solid run of concrete or steel post to carry the load. Reseda installations run $4,000 to $7,500 when we include the motor, rack, and safety photocells. The big variable we see locally is whether the existing CMU wall is straight enough to receive a track, or whether we need to pour a new footer to carry the gate cleanly.
Swing Gate Installation
Swing gates are the most common style on Reseda’s tract homes, and they’re also the style the Valley’s weather punishes hardest. Our Gate Installation team builds swing gates with proper thermal expansion gaps in the steel frame, which means the gate won’t rack and bind after a summer of 105-degree days. We set the hinges on stainless fasteners and anchor the posts into new concrete, not into the crumbling block that decades of Northridge-repaired mortar left behind. A double swing gate installation in Reseda runs $2,800 to $6,500, before automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We install and service gate operators from LiftMaster, FAAC, BFT, and Linear, and we carry common parts for these brands on our trucks. That means when we install your gate in Reseda, we’re not going to disappear for a week waiting on a control board. We stock what the Valley’s heat and dust actually wear out: capacitors, limit switches, photocells, and gear assemblies. If your opener quits in the middle of a heat wave, we can usually have it running on the first visit.
Common Gate Installation Problems We See in Reseda Homes
- Corroded post anchors pulling out of CMU block. After the 1994 Northridge earthquake, many Reseda homeowners had their block walls patched rather than rebuilt. The mortar was often mismatched, the rebar was skipped, and thirty years later those pilasters have lost their grip. A new gate bolted onto that block will eventually lean, and the post will pull loose.
- Heat-warped steel frames racking and binding. Reseda routinely hits 105°F in July and August, and steel expands. Gates hung without proper expansion tolerances will bind at the latch or scrape the driveway by September. We build that allowance into every gate we hang in the 91335 and 91337 ZIP codes.
- Santa Ana wind damage to under-anchored swing gates. When the winds funnel through the Valley each fall, a double swing gate acts like a sail. Original 1960s post footings were never poured for that load. We see bent hinge straps, sheared lag bolts, and gates blown clean off their posts.
- Failed pool-barrier hardware triggering code enforcement. Reseda has one of the highest backyard-pool densities in the Valley. LA code requires self-closing, self-latching hardware on any gate accessing a pool. The original 1970s hardware is long gone on many properties, and a routine repair call often turns into a full gate replacement to bring the pool barrier up to code.
Pricing for Gate Installation in Reseda, CA
Here’s what we quote in Reseda, as of this year. A pedestrian gate runs $1,800 to $3,400. A single swing driveway gate runs $2,800 to $4,800. A double swing gate runs $3,200 to $6,500. A sliding driveway gate runs $4,000 to $7,500. Add automation and the operator runs $900 to $2,400, depending on brand and weight rating. If we need to rebuild a CMU pilaster or pour a new concrete footer, that work is quoted separately and itemized before we start. You agree to the full price before a single bolt is turned.
We also honor standing offers on every Reseda job: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (925) 966-4150 for a free estimate.
We Also Serve Cities Near Reseda
Our crews serve Reseda and the surrounding San Fernando Valley communities, including Tarzana, Winnetka, Northridge, and Encino. If you’re a few blocks over the city line, we still come out. The same 42-year standard, the same written 90-Day Done Right Promise, and the same live person answering the phone.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Gate posts fail in Reseda because the block pilasters were never meant to carry a swinging steel gate for 60 years. After the 1994 Northridge earthquake, many pilasters were patched with whatever mortar was on hand, often without rebar, and the anchors set into that patch have been slowly working loose. By the time we see the wall, the post is leaning, the block face is cracked, and the right fix is to cut out the old anchors, pour new concrete, and set stainless J-bolts. That’s what we did on a 1963 ranch home off Vanowen Street last year, and the gate has swung true through two Santa Ana seasons since. Call (925) 966-4150 if your post is starting to lean.
Reseda’s summer heat cycles steel through daily temperature swings that can rack a gate frame and bind the hinges if the gate wasn’t built with expansion tolerances. We build every Reseda gate with a thermal gap in the frame and hinges sized for the load, so the gate still swings clean after a 105-degree afternoon. If your existing gate scrapes the driveway in August, the frame was likely hung without that allowance. We can fix it and quote the repair before any work starts.
Yes. LA pool-barrier code requires any gate that accesses a pool to be self-closing and self-latching, with the latch at least 54 inches off the ground. Reseda’s high pool density means many of these gates were installed in the 1960s and 1970s, and the original closing hardware has simply worn out or been removed. When we install a new pedestrian or driveway gate in Reseda, we spec the self-closing hinges and latch as standard, and we check the entrapment protection before we leave. Call (925) 966-4150 for a free estimate if you’re facing a code correction.
Reseda sits far enough inland that salt air drift is not the enemy here, the way it is in the beach cities. Your gate in Reseda is fighting UV, heat cycling, and wind, not marine corrosion. A galvanized steel frame with a good powder coat will hold up for decades. If you want the look of wrought iron, we fabricate in steel with the same thermal tolerances and a finish that won’t chalk out in five summers. Call us at (925) 966-4150 and we’ll help you spec the right material for your house.
Santa Ana winds catch a double swing gate like a sail, and if the original 1960s footings are cracked or undersized, the gate will bend, the hinge straps will shear, or the whole gate will blow loose. That’s a predictable call pattern for us every October and November. The fix is a stronger post, a properly cored footing, and hinges that can carry the cantilevered load. We inspect for all three on every Reseda installation, and we quote the full repair before we start.
Call Ironworks Gate Co. for Gate Installation in Reseda
If you need a new gate on your Reseda property, or a gate that’s been leaning and binding for years, call (925) 966-4150. You’ll get a live person, a straight answer, and a free written estimate. Victor Salinas and our crew stand behind every gate we hang in Reseda with the same written 90-Day Done Right Promise we’ve honored since 1984. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley since 1984.