Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Northridge Homeowners
When a driveway gate stops opening, sags on its hinges, or makes a grinding sound that makes you wince, you need someone who can fix it right the first time. Ironworks Gate Co. has repaired and rebuilt gates across Northridge for over 42 years, handling everything from a weathered hinge to a full automatic opener replacement. We answer the phone 24 hours a day, 7 days a week, and we show up when we say we will. If your gate is giving you trouble, call us at (925) 966-4150 and we’ll send a background-checked, uniformed technician to your Northridge home, usually the same day.
What Our Gate Repair Service Includes
Gate repair is rarely one problem. It is usually two or three small things that added up until the gate finally quit. We inspect the whole system: the hinges, the posts, the gate frame, the opener, the safety edges, and the keypad. Then we fix what is wrong and tell you plainly what is wearing out, so you are never surprised. Here is what our Gate Repair in Northridge involves.
Electric Gate Repair
Electric gate systems combine a motor, a control board, wiring, and safety sensors. When one part fails, the whole gate can go dead. We trace the circuit, test the board and sensors, and replace only what is actually broken, not parts you do not need. In Northridge, the summer heat cooks control boards mounted inside metal cabinets, so we often find the problem is a failed capacitor or a fried transformer rather than the motor itself.
Automatic Gate Repair
An automatic gate should open smoothly, stop at the right spot, and reverse if something is in the way. When it starts opening halfway, beeping constantly, or refusing to close, the limit switches, safety eyes, or receiver need attention. Our technicians work on automatic systems daily and carry the common OEM parts for LiftMaster, BFT, Linear, and several other brands, so most automatic gate repairs in Northridge are completed in a single visit with Best Gate Repair in Northridge, CA.
Hinge & Post Repair
Hinges carry the full weight of the gate and bear the brunt of every opening. Worn hinge pins make the gate lean and scrape along the concrete. We replace worn hinges, reinforce or rebuild the post footing where Northridge soil movement has shifted it, and set the gate so it swings clean and quiet. A gate that is rehung properly on solid posts will last decades, not months.
Gate Realignment
Gates sag over time, especially heavy wrought iron and steel gates that get used several times a day. A sagging gate means the latch does not catch, the wheels drag, and the motor works twice as hard as it should. We realign the gate frame, adjust the hinges, and reset the opener limits so everything lines up again. Most realignment jobs in Northridge take under two hours once we are on site.
Lock Repair
A gate that will not lock is a gate that is not doing its job. We repair and replace mechanical locks, install or fix electric strikes, and sync magnetic locks with your existing intercom or keypad. Whether you have a simple keyed deadbolt or an electric strike wired to a phone app, we make sure the gate locks and unlocks the way it should. Many Northridge homeowners call us for Emergency Gate Repair in Northridge, CA after a break-in attempt on a neighboring street, and we treat those calls as a priority.
Weld & Rust Repair
Steel and wrought iron gates rust, especially in Northridge where the dry heat alternates with winter rain. Surface rust can be ground down, primed, and painted before it becomes structural damage. Where the rust has eaten through a bottom rail or hinge plate, we cut out the bad section and weld in new steel. Our welders do the repair by hand, matching the existing design so the fix is invisible.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We are trained and equipped to service nine major gate-automation brands, and we keep the most common OEM parts on our trucks. That means fewer return trips and a repair that stays repaired. We service BFT systems regularly, from their commercial slide-gate operators to the residential swing-arm models common throughout the San Fernando Valley. BFT boards can be particular about voltage, and we have the diagnostic tools to read the fault codes correctly the first time.
Linear openers are another common sight on Northridge driveways, and we have rebuilt many of them over the years. The Linear line is known for simple, sturdy design, but even sturdy equipment wears out after enough cycles. We also carry parts for Ghost Controls and Viking systems, so if your gate has one of those units on it, you will not have to wait on special-order parts. Whether you have one of these brands or any other make on your driveway, we also offer Gate Repair - Winnetka.
Signs You Need Gate Repair Right Now
- The gate opens halfway and stops. That is usually a limit switch or a failing control board. If your gate reverses for no reason, it may be a safety sensor problem. These issues do not fix themselves, and they tend to fail completely at the worst possible time.
- The gate makes a grinding or squealing noise. Grinding means metal against metal, often in the gearbox or the drive chain. Squealing often means a belt slipping or a hinge pin running dry. Catching these sounds early can mean a $150 repair instead of a $900 motor replacement.
- The gate leans or drags on the ground. A sagging gate puts stress on the hinges, the post, and the opener. If you see scrape marks on the concrete or notice the gate getting harder to push manually, the hinge and post need attention before the whole system takes damage.
- The keypad or remote only works sometimes. Intermittent operation is often a failing receiver, a weak battery in the remote, or corrosion in the keypad wiring. It is frustrating, and it usually gets worse over time. We can diagnose it quickly and replace only what is needed.
- The gate closed on a car or a person. This is a safety issue and should be dealt with immediately. The safety edges or photo eyes have failed, or the force settings are wrong. A gate that does not reverse on contact is dangerous, and we treat those calls as emergencies.
Our Gate Repair Process - Step by Step
We work the same way on every job in Northridge: show up, find the real problem, settle the price, then fix it. Here is exactly what happens when you call.
- 1
Tell us what is going on. A live person answers the phone 24 hours a day, 7 days a week. You will not get a voicemail tree. You will describe the problem, and we will tell you honestly whether it sounds urgent or can wait for a scheduled visit.
- 2
We diagnose the gate on site. Our technician tests the motor, the control board, the safety sensors, the hinges, and the power supply. We use multimeters, fault-code readers, and manual force testing to pinpoint the failure. You will see what we see.
- 3
You get a written price before any work begins. No surprises on the bill, ever. We write down the cost of parts and labor, and we do not start until you approve it. The price we agree on is the price you pay.
- 4
We complete the repair in a single visit whenever possible. Because we stock common OEM parts for the brands we service, and because our technicians weld and fabricate on site, most Northridge gate repairs are finished the same visit. If a specialty part is needed, we tell you the lead time before we leave.
- 5
We test everything and review it with you. We run the gate through multiple open-close cycles, test the safety edges and photo eyes, and check the force settings. Then we walk you through what we did and answer your questions. Every job is backed in writing by our 90-Day Done Right Promise.
How Much Does Gate Repair Cost in Northridge?
Gate repair in Northridge typically runs between $145 and $1,400 depending on what has failed. A simple hinge replacement or remote programming usually lands in the $145 to $250 range. A new control board for a BFT or Linear opener commonly runs $400 to $700 installed, and a full swing-arm motor replacement can reach $1,100 to $1,400. Weld and rust repair is priced by the extent of the damage; small rust patches start around $150, while a full bottom-rail replacement with welding work can run $600 to $900.
What affects the price is mainly the cost of the part that failed and how much disassembly is required to reach it. A control board behind a weatherproof cover takes 30 minutes; a buried cable that has to be trenched and rerun takes longer. You avoid overpaying by working with a company that writes the price down before the work starts and never adds surprise charges. Our estimates are free, and our $89 Seasonal Tune-Up is a good way to catch small problems before they become big bills. Seniors and veterans get 5% off any repair, always. Call (925) 966-4150 for an exact quote on your gate.
Gate Repair Near Northridge - Our Service Area
We serve Northridge and the surrounding San Fernando Valley communities, including Granada Hills, Chatsworth, Porter Ranch, Winnetka, Reseda, Canoga Park, Tarzana, Panorama City, Encino, and Van Nuys. Most of our Northridge calls are reached within 60 to 90 minutes. If you are in Santa Susana or the hills above Porter Ranch, we may quote a slightly longer drive time, but the service and the written guarantee are the same. We are a local company, and we plan to be here for another forty years.
Serving Northridge, CA - Our Local Coverage Area
We’re based in the Northridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Northridge
Gate repair means fixing any part of a driveway or estate gate system that has failed or is wearing out, including the gate frame, hinges, posts, motor, control board, safety sensors, keypad, or lock. We diagnose the whole system, not just the symptom, so a small fix does not turn into a bigger one. This is the primary service we provide at our home base near Northridge and throughout the San Fernando Valley.
Most gate repairs in Northridge are completed in one to three hours on site. Parts availability matters, and because we stock OEM parts for BFT, Linear, Viking, and Ghost Controls among other brands, we usually have what we need on the truck. For work requiring a specialty part that is not stocked, we give you a clear lead time before the work starts.
Most repairs run between $145 and $1,400 depending on what has failed. A hinge or remote fix starts around $145, a control board replacement is usually $400 to $700, and a full motor replacement can reach $1,400. We write the price down before any work begins, so there are no surprises on the invoice. Call (925) 966-4150 for a free estimate.
Yes, we service all four of those brands and are certified on nine major gate-automation brands total. Our technicians read BFT fault codes, understand Linear board voltage requirements, and carry parts for Viking and Ghost Controls systems. Even if your gate is an older model from one of these makers, we can likely source what it needs.
In most cases, yes. We answer the phone 24 hours a day, 7 days a week, and we keep same-day slots open for Northridge calls. A gate stuck open, a gate that will not open at all, or a gate that closed on a vehicle or person is an emergency, and we dispatch to those first. For emergency repair, call (925) 966-4150 and a live person will handle it.
Every gate repair we complete is covered by our 90-Day Done Right Promise. It is a written guarantee, no paperwork and no arguing. If something is not right, we come back and make it right. That applies to parts and labor on every job, from a hinge replacement to a full opener rebuild.
Clear the area around the gate so our technician has room to work, and park any vehicles away from the gate swing path if you can. If you have a gate code or a specific remote that is acting up, have it ready to test. Beyond that, you do not need to do anything. We bring the tools, parts, and diagnostic equipment.
Schedule Your Gate Repair Service in Northridge Today
If your gate is not working the way it should, do not wait for it to fail completely. Call Ironworks Gate Co. at (925) 966-4150 for a free, no-obligation estimate. A live person answers 24 hours a day, 7 days a week. We repair gates in Northridge the right way, we write the price down before any work starts, and we back everything with our 90-Day Done Right Promise. That is a square deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Northridge since 1984.