Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
Gate parts and welding in Tarzana usually means one of three things: a hinge post that has leaned out of plumb, a broken weld on an older iron gate, or a sagging leaf that no longer latches. Our crews handle all three, plus rail repair, roller replacement, and custom welding on gates of any age. If your gate is binding at the latch or dragging on its track, call (925) 966-4150 and we will send a technician who knows Tarzana’s specific soil and heat conditions. You will get a written quote before any torch is lit or bolt is turned.
We work throughout Tarzana weekly, from the ranch-style tract homes along Ventura Boulevard up into the hillside estates off Reseda Boulevard. The difference between a repair that lasts three months and one that lasts twenty years in this area comes down to knowing what the clay soil does to posts and what 110°F heat does to operator parts. That knowledge is why homeowners here call our Gate Parts & Welding team instead of a general handyman.
Why Ironworks Gate Co. Is Tarzana’s Preferred Gate Parts & Welding Company
Founded in 1984, Ironworks Gate Co. has spent over four decades repairing gates across Southern California. Our technicians are background-checked and uniformed, and they work under a straightforward code: crafted right, every time, your home first, standing behind it. The 400th job gets the same care as the first. For Tarzana homeowners, that means a technician who will not rush a hillside post reset or weld a hinge without checking whether the post underneath is still sound.
Every job we complete carries our 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork, no arguing. Our Gate Parts & Welding in Tarzana customers also benefit from a live person answering the phone 24 hours a day, 7 days a week. When your gate is hanging off its hinges at 9 p.m. on a Sunday, you will not get a voicemail tree.
Our Gate Parts & Welding Services in Tarzana
We stock a full range of gate hardware and perform welding repairs on site across Tarzana, including 91356 and 91357. Here is what we handle most often in this area.
Hinge Replacement
Tarzana’s hillside neighborhoods, especially El Caballero and Braemar, hold a concentration of 1980s and 1990s wrought-iron swing gates. Those original hinge barrels wear out. The barrel elongates, the pin slops, and the whole leaf drops until it scrapes or fails to latch. We remove the old hinge, weld in new barrels sized for the gate’s weight, and re-hang the leaf square. On grades, we also address the post lean that caused the hinge to fail in the first place.
Post Replacement
This is the single most common hillside gate repair we perform in Tarzana. Expansive clay soils above Reseda Boulevard swell in winter and shrink in summer, racking gate posts out of plumb by an inch or more annually. A leaning post cannot be fixed by tightening hinge bolts. The post has to be cut free, the footing excavated deeper, and new concrete poured with proper embedment. We quote post replacement and concrete re-pour as standard parts of every swing-gate repair in the hillside corridors, not as an add-on surprise.
Rail Repair
On the flat Valley floor, most Tarzana homes built between the 1950s and 1970s have tubular-steel or aluminum slide gates on concrete driveways. The bottom rail takes abuse: it collects grit, gets scraped by rollers, and eventually cracks or corrodes through. We section out the damaged rail, weld in a new piece, and grind it flush before painting. If the metal is too thin to weld, we tell you straight and recommend full rail replacement.
Custom Welding
Older gates were often built to match the home’s architecture. A broken scroll or a snapped picket cannot be ordered off a shelf. Our welding bench can fabricate replacement sections, reinforce cracked frame corners, and stitch repair ornamental details so the repair does not announce itself. We have matched ironwork on gates from Reseda Boulevard ranches to Braemar estates. If your gate has a detail you want preserved, bring it up when you call, and we will look at it before touching anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
Many Tarzana estate gates built in the 1980s and 1990s run on early-generation Viking or Linear operators. Those units are no longer manufactured, but many can still be serviced with compatible parts. We also work on BFT and Ghost Controls operators, among the nine major brands our technicians train on. We carry common control boards, capacitors, receivers, and limit switches on our trucks, so most Tarzana repairs finish in one visit. If a legacy operator is beyond saving, we will tell you honestly and price a replacement before doing any work.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Hinge post lean on hillside swing gates. Expansive clay soils above Reseda Boulevard shift measurably between wet winters and dry summers. Posts rack out of plumb, the gate leaf sags, and the latch stops lining up. This is a structural problem, not a hinge problem, and it needs a post reset and re-pour.
- Capacitor and circuit-board failure in 110°F heat. The San Fernando Valley regularly hits 105 to 110°F in Tarzana, far hotter than coastal Los Angeles. That heat kills capacitors and control boards in older Viking and Linear operators, leaving gates dead or working only sporadically.
- Weld cracks from Santa Ana wind stress. Hard fall and winter winds funnel through the Valley and slam unlatched swing gates against their stops. Repeated impact cracks welds at hinge plates and frame corners. We see a seasonal spike in hinge replacement and custom welding calls every Santa Ana season.
- Aluminum slide gates warping in summer heat. On flat streets near Ventura Boulevard, aluminum gates exposed to direct afternoon sun can warp enough to bind in their tracks. The fix is usually rail straightening and roller adjustment, not full replacement.
Pricing for Gate Parts & Welding in Tarzana, CA
Here are the numbers we typically quote in Tarzana. A standard hinge replacement on a wrought-iron swing gate runs $180 to $340 per hinge, depending on gate weight and access. Post replacement with concrete re-pour on a hillside property starts around $550 and can reach $1,200 when the footing needs to go below grade for stability. Rail repair or sectioning runs $150 to $400. Custom welding jobs start at $150 for a small crack repair and go up from there based on fabrication time. We offer $50 off any repair over $250 and a free second opinion on any written estimate. Every price is quoted and agreed before any work starts. You will know the number before we strike an arc.
We Also Serve Cities Near Tarzana
Our crews cover the central and western San Fernando Valley. Beyond Tarzana, we serve Reseda, Encino, Winnetka, and Canoga Park, which means we can often schedule same-week visits for gate parts and welding repairs across the area. If you are in a neighboring community, call us and mention your cross streets, and we will give you a straight answer on scheduling.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
The hinges are almost never the root cause. What is happening is that your gate post is leaning out of plumb because Tarzana’s expansive clay soil expands in winter and shrinks in summer, pushing the post a little further off vertical each year. Tightening hinge bolts on a leaning post just postpones the problem. The real fix is cutting the post free, re-pouring the footing deeper, and re-hanging the gate. Call (925) 966-4150 and we will tell you whether your post can be re-set or needs full replacement.
In many cases, yes. Older Viking operators can often be retrofitted with current photo-eye sensors and edge-safety equipment, provided the control board supports the added inputs. Some boards need a small relay module. If your board is too old to accept safety inputs, we will quote you a new operator and explain the difference in cost. We service Viking, Linear, BFT, Ghost Controls, and several other brands, and we can tell you what is compatible before ordering anything.
Direct San Fernando Valley sun on an aluminum gate in 105 to 110°F heat expands the metal enough to bow the rail. If the gate was installed with tight tolerances, that expansion causes binding against the track or wheels. The standard fix is to straighten the rail, adjust the roller spacing, and in some cases add a heat gap to the end stop. It is a known issue on flat Valley-floor slide gates, and we handle it regularly in 91356 and 91357.
If the hinge barrel itself failed from wear, replacing the hinge is usually enough. If the post is leaning, cracking around the base, or the gate leaf has dropped more than about half an inch, the post is likely the real problem. Welding a new hinge onto a leaning post means the new hinge inherits the old problem. We will assess the post with a level before we give you a quote, and we will tell you honestly if a post replacement is needed or if a hinge job alone will hold.
The latch is not holding, and the wind is doing the rest. Santa Ana winds hit gate leaves like a sail. If your latch strike is worn, the leaf drops slightly, and the wind pushes it off the stop. The fix is usually a new latch, a hinge re-hang, and often a sag correction kit on the leaf. We also see broken welds at hinge plates from repeated wind slamming, so we check the welds whenever we handle a wind-related latch repair.
Call Ironworks Gate Co. for Gate Parts & Welding in Tarzana
A gate that sags, scrapes, or refuses to latch is not a project to put off. The longer a leaning post sits in Tarzana’s clay soil, the worse it gets. The longer a broken weld goes unrepaired, the more stress the remaining metal takes. Call (925) 966-4150 for a free estimate on any gate parts or welding work in Tarzana. You will speak to a live person, get an honest assessment, and receive a written price before any work begins. We stand behind every job with our 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana and the San Fernando Valley since 1984.